wp65bad8e1.png
wp56e7d9c7_0f.jpg
wp4bacf531.png
wp0203508f.png
wp641357af.png
wp641357af.png
wp4965b47c.png
wpd508510b.png
wpdf2eb68f.png
wp7b4fd8c4.png
wpc971a6ea.png
wpdf90fcd6.png
wp87b2ce71_0f.jpg
wp835883cd_0f.jpg
wp4e2a6a44.png
series
wpe2f16dc5.png

The power system range finds it’s roots in the P3000 and P4000 Powercentre range from 1982. The P3000 offered the ability to isolate high load / non-essential equipment, if the service battery fell to a preset low voltage. Power was restored automatically if the battery was charged, also included was a display of battery voltage and recharge state. While the P4000 added programmed split charge, and additional display, to the P3000 system. Over the following years the range was further developed and increased in ratings, with dual supply modules added.

Dual supply, these allow a system, or a number of systems, to be supplied from two independent battery banks. Both battery banks are isolated from each, and power is drawn from bank with the higher capacity.

Power reserve, these allow a battery bank to be used as a single bank normally, but split to maintain a power supply to critical systems at a low battery voltage. The system maintains continuity during switching, and the reserve section may be at a higher level for added security. Battery banks are automatically reconnected when service voltage returns to a suitable level.

Power-lockout, these units allow non-essential equipment to be locked out if service battery falls to a pre-set voltage. Power is automatically restored at a satisfactory battery voltage.

wpccef8c62.png

Integrated systems, these units are a pre-assembled power distribution system housed in a IP65 enclosure. The system can include, remote power switching, programmed multi-bank split charge, one touch link-start, electronic shunts, remote status display,  power reserve, power-lockout, dual power supply, key fob remote control, engine room fan control, cabin light control,

Motor control, these units are multifunctional, they will provide remote power switching, while monitoring, for low voltage, high amperage, and high  temperatures drop out. There is an option for motor direction control, and a wireless remote control system.

wp2bbfaef5.png
wp8460f897.png
wpc89401e3.png
wpcfd2f024.png
wpcb94ec26.png
wp2bbfaef5.png
wp373e8033.png
wpccef8c62.png
wpe40da394_0f.jpg
APR 2008 release
MAR 2008 release
FEB 2008 release
type 1
wpfb353112_0f.jpg
JAN 2008 up-grade
1982
the start of the story
wp5533b116.gif
wp5533b116.gif
wp5533b116.gif
wp5533b116.gif
wp5533b116.gif
wp5533b116.gif
wpe1d1cc76_0f.jpg
wp641357af.png

Switch gear systems, after a 10 absence, we are introducing a new switch gear system, including remote battery isolators, battery monitoring, power reserve, power-lockout, also included in this release will be circuit breakers for hostile environments.

wp5a9cf639.png
APR 2008 release
wp5533b116.gif