Designed for small inboards, or outboard engines including single or twin engine installations and a choice of installation layouts. Bi-direction charging allows a solar panel, or similar, to charge the engine battery as well as the engine, charging the service battery. With twin engine installations it allows both alternators to charge both battery banks, offering improved load sharing and a better recharge level in most cases.

Heavy duty split charging system for single or twin engine installations. As with all Powercentre systems, the alternator is connected to the main starter motor supply cable. This means that the alternator is always connected to the engine battery, and normally requires no changes to the standard wiring. Units includes a power-lockout option as standard, this allows selected loads to be dropped out at low service battery voltage power is restored automatically when a satisfactory battery level is achieved. Optional remote link starting to the service battery is included, together with an alternative automatic relay dropout. This function will dropout the relay if engage to charge the engine battery from a solar panel, protecting the charging system.

P2150

P2120

P2130

P2200

P2210

P2230

12 volt 40 amp twin battery single engine

12 volt 40 amp twin battery twin engines

12 volt 40 amp twin battery 1, 2 or both switch

12 volt 100 amp twin battery, no power-lockout relay

12 volt 100 amp twin battery, 100 amp power-lockout relay

12 volt 200 amp twin battery, 100 amp power-lockout relay

12 volt 100 amp twin battery, 1 , 2 or both switch

Details on request for 24 volt and other relay combinations

32151000

32121000

32131000

32201100

32211120

32211220

32231100

Specification :- relay 40 amp continuous, voltage 12 v dc, cut-in set @ 13.8 v, drop out set @ 13.0 v cut-in user adjustable. output terminals M5, dimensions - 65 mm x 50 mm x 35 mm, fixing crs 75 mm

Specification :- relays, 100 or 200 amp continuous, 500 or 1300 amp surge, 12 v, 24 v option, cut in set @ 13.8 v, drop-out  set @ 13.0 v, cut-in user adjustable, output terminals M8,  dimensions - 175 mm x 140 mm x 60 mm.