We can offer a refurbishment service for most switch panels supplied to Sealine.
To the last switch panel designed and supplied by Powercentre for the Sealine 310
To the first fully integrated Sealine 360 Statesman panel
From the very first Sealine 30 panel
Phone, e-mail, or write , we are more than happy to discuss your problem or requirement, and produce the optimum solution for you.
replacement
Sealine 305 Statesman
DC/AC distribution panel
Sealine 305 Statesman
DC/AC distribution panel
H29 ... 290 helm
First supplied for the Sealine 328, these were fitted with no frame, and were the first to have automotive style connectors. The first units had a different type of connector, and require returning for a rebuild unit, as the connectors are not available to-day. Units can be identified by a black fascia, lacking a moulded frame, and green windows to legends, please contact us..
This helm panel has been supplied in more styles than any other, we have standardised on a design that covers most options.
Check your panel to the one shown above, if your POWER switches have different legends, see below, please advise us and we can wire a new panel to match the type you have.
All panels had duel level LED indicators, and were fitted with engine bilge pump running warning buzzer. Outputs are via 2 x 15 way automotive style connectors. Units were made in black, dark grey, light grey, white, and a blue / light grey. Frames were black or white, logo colours also varied.
These panels were fitted to Sealine 260 Se, 270 Se, 290 Am. 300 Am, 310 St, 310 Am, 320 St, 328 So, 330 St, 330 Am, 350 Am, 360 Am, 380 Am, and 400 Am.
Check your panel to the one shown above, if your POWER switches have different legends, see below, please advise us and we can wire a new panel to match the type you have.
All panels had duel level LED indicators, and were fitted with engine bilge pump running warning buzzer. Outputs are via 2 x 15 way automotive style connectors. Units were made in black, dark grey, light grey, white, and a blue / light grey. Frames were black or white, logo colours also varied.
These panels were fitted to Sealine 260 Se, 270 Se, 290 Am. 300 Am, 310 St, 310 Am, 320 St, 328 So, 330 St, 330 Am, 350 Am, 360 Am, 380 Am, and 400 Am.
have switches in the following order,
aux, winch, equip, log, see photo
Replacement panels will have legends as per the standard one, but the plugs will be wired to match the boat plug and harness, note the aux switch will now be the vhf switch.
aux, winch, equip, log, see photo
Replacement panels will have legends as per the standard one, but the plugs will be wired to match the boat plug and harness, note the aux switch will now be the vhf switch.
early 328 fascia
H36 ... 365 helm
The helm panel fitted to most 365’s and 400’s, featured duel level LED indicators and engine room bilge pump running alarm. Early units feature tab and spade connectors, most are fitted with 2 x 15 way automotive type connectors.
We still hold stock of Lexan screen printed fronts for most of these panels, and refurbishment of existing panels can be under taken.
Due to the size and complexity of these panels, we are happy to discuss refurbishment issues.
type A H29 290 helm
type B H29 290 helm
type C H29 290 helm
shortly after introduction of the panel, the aux switch label changed to vhf, spare helm panels will be of the later vhf type switch legend.
H18 ... small helm
Replacement small helm is due Jan 2008
HT36 ... 365 helm
Fitted with tab terminals in place of the
wiring loom and 2 x 15 way connectors.
wiring loom and 2 x 15 way connectors.
replacement Westerly panel
